Wood Herringbone Plank Cornhole Wrap Set

  • $49.00


This listing is for 24.5 in x 48.5 in wrap(s). This does NOT include any cornhole boards.

WHAT YOU WILL RECEIVE:

     High Quality Cornhole Wrap(s) measuring 24.5 in wide x 48.5 in high. The cornhole wrap(s) have a quarter inch bleed to ensure correct fit on standard cornhole boards (24 in x 48 in).

     Installation instructions listed below. Please make sure surface area is clean and free of any debris to ensure a quality application.

     This listing includes a hard plastic squeegee with a felt cover. Use the felted edge to squeegee down your wrap.

LAMINATED OR NON-LAMINATED CORNHOLES WRAP(S):

Laminated wrap(s) have clear gloss laminate applied after they are printed. This guards against scratches, UV rays and also gives a smooth surface to your wrap. Laminated wrap(s) do not require a clear coat after application of the wraps to your cornhole boards.

NOTE: Non-Laminated Wrap(s) require a clear coat after they are installed.

 

SHIPPING:

Our ETA is 3-5 Business days. If you need it sooner please contact us at 601-798-7306 or email us to see if it will be possible and the cost associated. Please remember this RUSH UPGRADE is for us to complete your order and does not affect your shipping time with UPS, USPS, FedEx, etc.

Shipping usually takes between 3-5 business days.

*The image is for display purposes only and may not reflect the actual size of the item. Please refer to size measurements for specifications. If you need a custom size call us at 601-798-7306 or email us and we will make you a custom wrap.

Please Note that these do NOT have the hole cut of them. This is to ensure that the wraps will have a universal fit for all standard sized corn hole boards.

 

APPLICATION:

Decals should only be applied to clean surfaces. Wipe down your boards to remove any debris.

Peel off the backing tape of your decal and lightly mist the decal with a solution of one drop of dish soap per 12 ounces of water.

Place the decal on your board starting from one edge and slowly lay down the rest of the decal. You should be able to slide the decal slightly to position it evenly on the board.

Use a credit card or squeegee to smooth out the surface of the decal. This will help you massage out the air bubbles that are a seemingly unavoidable part of decal application.

After you have applied the wrap, you will then need to use a blade to cut out the hole. There is a quarter inch bleed around all sides of the decal to ensure a perfect fit on your board.